+1 (800) 671-9662
Wholesale prices
Your basket is currently empty.
Need a large quantity? Call (800) 671-9662 for a quote.
The SafetyRail ADA-compliant barricade is the easy way to channel, divert or close pedestrian walkways. Suited for public roads, sidewalks, and even construction sites as a longitudinal channelizer device (LCD). SafetyRail meets ADA guidelines and MUTCD MASH compliance with its continuous, interlocking Wave Guide Rails which prevent hand snagging. The SafetyRail barricade has an extra low ground clearance of just 1.5" from the ground, reducing the potential for trapped cane tips or tripping hazards. Each upright also has the ability to attach aids such as Audible Information Devices or Warning Lights.
The SafetyRail pedestrian delineator and channelizer barricade provides a quick and secure assembly with built-in notches which allow the Guide Rails to snap into the black bushings of each upright. The SafetyRail uprights weigh less than 7 lbs per piece but can also be filled with 18 lbs of sand for ballast, additionally, there is space for extra sandbags to be placed over the feet.
Made in the USA and manufactured using blow-molded HDPE for durability and strength, this ADA barricade is rustproof and suited to all weather! Stop dealing with heavier, cumbersome wood barriers, get in contact with our team today to discuss your needs or to learn a little more, keep scrolling.
1 x Single SafetyRail Upright Frame - The toolless upright frame weighs just 7 lbs before supplementing with ballast if needed.
2 x Wave Guide Rails - Two centerboards with your choice of length (4 or 6') and optional stripe direction with 3M retro-reflectivity grade sheeting.
To complete your barricade run, add 1 additional SafetyRail Upright to support the last length of Wave Guide Rail centerboards. If you plan on configuring multiple separate barricade lengths/runs, you can add extra uprights to your cart.
If you have any questions, please call us on (800) 671-9662
Tested to Manual for Assessing Safety Hardware (MASH) Test Level: 3 - Click to view the download area for FHWA Eligibility Letter
| Guide Rail Length | Reflective Sheet Options | Sides & Stripe Directions |
| 4' Wave | Engineer (ENG) | 1 Side with Right Direction Stripes |
| 6' Wave | High-Intensity Prismatic (HIP) | 1 Side with Left Direction Stripes |
| Diamond (DIA) | 1 Side with Bidirection Stripes | |
| Both Sides with Left or Right Direction Stripes | ||
| Both Sides with Bidirectional Stripes |
Each Guide Rail Centerboard has built-in notches to keep your barricades fixed into the SafetyRail bushings. Guide Rails are available in 4 or 6 feet lengths depending on your project needs. The patented Wave centerboard features a unique indented 'wave' shape on the back of each centerboard to help strengthen and increase rigidity. The boards' one-piece design has closed ends to prevent dirt and moisture from penetrating.
Wave Guide Rails measure 0.8" x 7.5" x 48" or 72" (4 or 6 feet) and are made from HDPE with UV inhibitors.
Meets ASTM D4956 Type 1 and is an enclosed film or lens using glass beads or prismatic optical technology.
Meets ASTM requirement standards for D4956-09 Type III and Type IV, as well as ASTM 4956-07 Type X. It is a non-metalized micro prismatic lens reflective sheeting. HIP sheeting is highly reflective, and its durable topcoat protects signs and other traffic control devices against scratches and abrasion. Not only is it highly reflective at night, but it also commands attention during the day as well.
Meets ASTM Type XI standard. A full cube prismatic reflective sheeting that returns almost 60% of the available light to vehicle drivers which is about double what HIP reflective sheeting reflects. With pending legislation in the US, this material will likely be required to replace many existing signs. Currently, all new “critical” traffic control signs (such as Stop signs, speed limit signs, etc.) are required to utilize this sheeting.
3M Retro-reflective sheeting can be applied on one side or both sides of the centerboards. Example option configurations: Both Sides (RIGHT/RIGHT) = Right leaning stripes on both sides of the Wave board. Both Sides (RIGHT/LEFT) = Right leaning stripes on one side of Wave board with left leaning on the other.
Where barricades extend across a path or roadway, the stripes should slope downward in the direction toward which pedestrians or vehicles must turn.
When providing both right and left turns, the barricade stripes should slope downward in both directions from the center of the barricade or barricades. Where no turns are intended, the stripes should be positioned to slope downward toward the center of the barricade or barricades.
| SafetyRail™ | SafetyWall® - Click to view | |
|---|---|---|
 |
 |
|
| Ballast/Stabilization Type | Fillable with sand & use of sandbags | Sandbags placed on steel legs |
| Barricade Color Options | White | White or Orange |
| Weight | 7 lbs empty and up to 25lbs with sand fill | 35 lbs plus additional sandbags |
| Dimensions | 3.25" W x 38" H x 24" L at base | 3" W x 36.25" H x 74" L |
| Length of barricade when deployed | 48" or 72" Wave Guide Rail/Centerboard | 72" (Overall length is 74") |
| Gap between bottom and ground | 1.5" (From lower Wave board) | Less than 2" |
| Reflective Stripe Options | Engineering, High-Intensity Prismatic, Diamond | High-Intensity Prismatic, Diamond |
| Reflectives available on both sides | ||
| Mount for Audible Information Devices or Warning Lights | ||
| Carry handles | ||
| Transport Stackable | ||
| Toolless assembly | ||
| ADA Compliant | ||
| FHWA MASH Approved | ||
| MUTCD 2009 Compliant | ||
| Made in the USA | ||
| Material Composition | HDPE with UV inhibitors | HDPE with UV inhibitors, Galvanized Zinc Steel Tube Supports |
| Compatible with | PSS Wave Centerboards | PSS BoardWalk Ramp |
SafetyRail Barricades are ideally suited for controlling and diverting pedestrian foot traffic from sidewalks or temporary access ways for events.
Create temporary diversions for pedestrian walkways by using a combination of 4 or 6 foot long centerboards to contour access around your construction site.
We provide free, impartial product advice and knowledge by phone or email. It would be our pleasure to talk with you about your road safety needs and any questions you may have. (800) 671-9662
